SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1025 (COMPONENT LOCATIONS & POWER, GROUND AND SPLICE PACK CONNECTOR END VIEWS)ELECTRICAL CENTER IDENTIFICATION VIEWSFUSE BLOCK - I/P C1
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Fuse Block - I/P C1

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Fuse Block - I/P C1
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuse Block - I/P C1 Connector Terminal Identification
GM1667403Courtesy of GENERAL MOTORS CORP.
Fuse Block - I/P C1 Connector Parts Information

Connector Part Information 
  • OEM: 15477601
  • Service: See Catalog
  • Description: 40-Way F GT 150 280 Metri-Pack 800 Series
  • Pins: A1, A2
  • Terminal/Tray: 12191812/19
  • Core/Insulation Crimp: C/A
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
  • Pins: A5, A6, C2, C3, C4, K1, K2
  • Terminal/Tray: 12191811/3
  • Core/Insulation Crimp: TBD
  • Release Tool/Test Probe: TBD
  • Pins: E3, F1
  • Terminal/Tray: 12110127/19
  • Core/Insulation Crimp: F/G
  • Release Tool/Test Probe: 12150860/J-35616-44 (YE)
  • Pins: E1
  • Terminal/Tray: 15304713/19
  • Core/Insulation Crimp: F/D
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: B2, E2, D1, D2, F2, F3, G1, G2, J1, J2, J3
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: Pins B2, E2 - E/A
  • Core/Insulation Crimp: Pins D1, D2, F2, F3, G1, G2, J1, J2, J3 - 2/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Fuse Block - I/P C1 Connector Terminal Identification

Pin Wire Color Circuit No. Function
A1 TN 201 Left Front Speaker Output (+)
A2 GY 118 Left Front Speaker Output (-)
A3-A4 - - Not Used
A5 GY 1690 Automatic Day/Night Mirror Signal (DL3/DR4)
A6 PK 1691 Low Reference (DL3/DR4)
B1 - - Not Used
B2 RD/WH 2540 Battery Positive Voltage
B3 - - Not Used
C2 D-GN 5060 Low Speed GMLAN Serial Data
C3 L-BU/WH 1314 Left Front Turn Signal Lamp Supply Voltage (DL3/DPN)
C4 L-BU/WH 1314 Left Front Turn Signal Lamp Supply Voltage (DL3/DPN)
C5-C6 - - Not Used
D1 RD/WH 3040 Battery Positive Voltage
D2 RD/WH 2940 Battery Positive Voltage
E1 BK 1850 Ground
E2 RD/WH 3840 Battery Positive Voltage
E3 RD/BK 42 Battery Positive Voltage
F1 RD/BK 842 Battery Positive Voltage
F2 TN 294 Door Lock Actuator Unlock Control (Except E52)
F3 RD/WH 240 Battery Positive Voltage
RD/WH 240 Battery Positive Voltage (TQ5/TRW/UG1)
G1 GY 295 Door Lock Actuator Lock Control (Except E52)
G2 RD/WH 1040 Battery Positive Voltage
RD/WH 1040 Battery Positive Voltage (X88/Z88)
H1-H6 - - Not Used
J1 RD/WH 2740 Battery Positive Voltage
J2 RD/WH 2240 Battery Positive Voltage
J3 RD/WH 2140 Battery Positive Voltage
K1 BN 6136 LED Dimming Supply Voltage
K2 YE 6817 LED Backlight Dimming Control
K3-K6 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.