SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEMREPAIR INSTRUCTIONSSEAT ADJUSTER REPLACEMENT - FRONTINSTALLATION PROCEDURE
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Installation Procedure

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Installation Procedure
    Fig 1: Seat Cushion, Adjuster & Riser
    GM333626Courtesy of GENERAL MOTORS CORP.
  1. Position the seat adjuster (2) to the seat cushion frame (1).
    2. NOTE: Refer to Fastener Notice .
  2. Install the bolts to retain the seat adjuster (2) to the seat cushion frame (1).

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

    3. Fig 2: Seat Cushion, Adjuster, Riser, Adjuster Switch & Motor Electrical Harness
    GM333628Courtesy of GENERAL MOTORS CORP.
  3. Position the seat cushion (1) and the seat adjuster (2) to the seat riser (4).
  4. Install the nuts (3) to retain the seat adjuster to the seat riser.

    Tighten:  Tighten the nuts (3) to 45 N.m (33 lb ft).

  5. Connect the electrical connectors to the power seat motors, if equipped.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.