SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTWIPER/WASHER SYSTEMSWIPER SYSTEM & WASHER SYSTEMCOMPONENT LOCATORWIPER/WASHER SYSTEM CONNECTORS
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Wiper/Washer System Connectors

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Wiper/Washer System Connectors
Turn Signal/Multifunction Switch - C3

GM811190Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15339058
  • 7-Way F Metri-Pack 150 Series (GY)
Pin Wire Color Circuit No. Function
G - - Not Used
H PK 94 Windshield Washer Switch Signal 1
J GY 478 Windshield Wiper Switch Supply Voltage
K D-BU 477 Windshield Wiper Switch High Signal
L-N - - Not Used
Windshield Washer Fluid Pump

GM635009Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12052641
  • 2-Way F Metri-Pack 150 Series (BK)
Pin Wire Color Circuit No. Function
A OG 228 Windshield Washer Pump Control
B BK 350 Ground
Windshield Wiper Motor

GM812593Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12186347
  • 6-Way F Metri-Pack 150, 280 Series (GY)
Pin Wire Color Circuit No. Function
A BK 350 Ground
B YE 143 Accessory Voltage
C D-BU 477 Windshield Wiper Switch High Signal
D PK 94 Windshield Washer Switch Signal 1
E OG 2268 Windshield Washer Relay Control
F GY 478 Windshield Wiper Switch Supply Voltage
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.