SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 5.3 T, 4L60E/M30REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 901 (DATA COMMUNICATION SYSTEM)COMPONENT LOCATORDATA COMMUNICATION CONNECTORSBODY CONTROL MODULE (BCM) - C5
2006 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.3 T, 4L60E/M30

Body Control Module (BCM) - C5

2006 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.3 T, 4L60E/M30SECTION Body Control Module (BCM) - C5
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 GMC Savana Special, 2007 GMC Savana Camper Special, 2007 GMC Savana, 2007 Chevrolet RV Cutaway, and 2007 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) - C5 Connector End View
GM304345Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) - C5 Connector & Terminal Parts Information

Connector Part Information 
  • OEM: 12177195
  • Service: 15305931
  • Description: 6-Way F Metri-Pack 150 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 12129484/19
  • Core/Insulation Crimp: Pins D, E - E/A
  • Core/Insulation Crimp: Pins E, F - E/C
  • Release Tool/Test Probe: 12094429/J-35616-2A (GY)
Body Control Module (BCM) - C5 Terminal Identification

Pin Wire Color Circuit No. Function
A-C - - Not Used
D RD/WH 2140 Battery Positive Voltage
E D-BU/WH 149 Courtesy Lamp Supply Voltage - w/o YF7
GY/BK 690 Courtesy Lamp High Control - w/YF7
F L-GN 24 Backup Lamp Supply Voltage (Passenger/Cargo/Cutaway w/DF5)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.