Inflatable Restraint Passenger Presence System (PPS) Module

2006 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.3 T, 4L60E/M30SECTION Inflatable Restraint Passenger Presence System (PPS) Module
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Passenger Presence System (PPS) Module Connector End View
GM1468542Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Passenger Presence System (PPS) Module

Pin Wire Color Circuit Function
1 0.5 RD/WH 4440 Battery Positive Voltage
2-3 - - Not Used
4 0.35 PU 5611 Passenger Seat Belt Tension Sensor Signal
5 0.5 BK/WH 2751 Low Reference
6 0.35 YE 5608 Occupant Pressure Sensor Signal
7 0.35 D-GN 5609 Occupant Pressure Sensor Voltage Reference
8-13 - - Not Used
14 0.35 TN 5613 Low Reference
15 0.35 GY 5610 Low Reference
16 0.35 L-BU 5612 Passenger Seat Belt Tension Sensor Voltage Reference
17 0.35 D-GN 5060 Low Speed GMLAN Serial Data
18 - - Not Used
Connector Part Information 
  • OEM: 15460299
  • Service: See Catalog
  • Description: 18-Way F Micro-Pack 100W Series Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: Service with Pigtail
  • Core/Insulation Crimp: N/A
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.