Typical Scan Tool Data

2006 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.3 T, 4L60E/M30SECTION Typical Scan Tool Data
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
IMS A/B/C/P

Circuit Normal Range Short to Ground Open Short to Voltage
Operating Conditions:Β  Ignition ON, range selector in Park
Transmission Range Switch Signal A LOW LOW HI HI
Transmission Range Switch Signal B HI LOW HI HI
Transmission Range Switch Signal C HI LOW HI HI
Transmission Range Switch Signal P LOW LOW HI HI
HI = 12 volts
LOW = 0 volts
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.