SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 5.3 T, 4L60E/M30REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1103 (DATA COMMUNICATION SYSTEM)COMPONENT LOCATORDATA COMMUNICATION CONNECTORSAUXILIARY BODY CONTROL MODULE (XBCM) X2 (EXPORT)
2006 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.3 T, 4L60E/M30

Auxiliary Body Control Module (XBCM) X2 (Export)

2006 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.3 T, 4L60E/M30SECTION Auxiliary Body Control Module (XBCM) X2 (Export)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Auxiliary Body Control Module (XBCM) X2 (Export) Connector End View
GM1552610Courtesy of GENERAL MOTORS CORP.
Auxiliary Body Control Module (XBCM) X2 (Export) Connector Parts Information

Connector Part Information 
  • OEM: 15357040
  • Service: 12110626
  • Description: 8-Way F Metri-Pack 280 (L-GY)
Terminal Part Information 
  • Pins: A-B
  • Terminal/Tray: 12110844/4
  • Core/Insulation Crimp: C/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: G-H
  • Terminal/Tray: 12110844/4
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Auxiliary Body Control Module (XBCM) X2 (Export) Connector Terminal Identification

Pin Wire Color Circuit No. Function
A 0.8 L-BU 1620 CHMSL Supply Voltage
B 0.8 RD/WH 4540 Battery Positive Voltage
C-H - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.