SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 5.3 T, 4L60E/M30REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1006 (OBJECT DETECTION SYSTEM)COMPONENT LOCATOROBJECT DETECTION CONNECTORSREAR VIEW CAMERA IMAGE DISPLAY MODULE (UVC)
2006 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.3 T, 4L60E/M30

Rear View Camera Image Display Module (UVC)

2006 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.3 T, 4L60E/M30SECTION Rear View Camera Image Display Module (UVC)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear View Camera Image Display Module (UVC) Connector End View
GM1710983Courtesy of GENERAL MOTORS CORP.
Rear View Camera Image Display Module (UVC) Connector Parts Information

Connector Part Information 
  • OEM: 15499371
  • Service: 19115105
  • Description: 12-Way F KAIZEN 0.64 (BK)
Terminal Part Information 
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
Rear View Camera Image Display Module (UVC) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 D-BU 38 Backup Lamp Supply Voltage
2 PK 239 Ignition 1 Voltage
3 BK/WH 2751 Ground
4 OG 6201 5-Volt Reference
5 TN/BK 6202 Camera Ground
6 - - Not Used
7 Bare 6974 Camera Drain Wire
8 - - Not Used
9 WH 6798 Camera Video Signal
10 Bare 6799 Camera Shield
11 L-BU 6973 Camera Signal -
12 PK 6972 Camera Signal +
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.