SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CAB & CHASSIS SILVERADO 2D PICKUP, 8.1 G, 4WD, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALBODY ELECTRICALOEM CONNECTOR END VIEWSSIR CONNECTOR END VIEWSINFLATABLE RESTRAINT STEERING WHEEL MODULE CONNECTOR END VIEW
2006 Chevrolet Cab & Chassis Silverado 2D Pickup, 8.1 G, 4WD, Automatic

Inflatable Restraint Steering Wheel Module Connector End View

2006 Chevrolet Cab & Chassis Silverado 2D Pickup, 8.1 G, 4WD, AutomaticSECTION Inflatable Restraint Steering Wheel Module Connector End View
Inflatable Restraint Steering Wheel Module - Single Stage (HVY)

GM966360Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 54560210
  • 2-Way F ABX-3 Code B (YE)
Pin Wire Color Circuit No. Function
A WH 347 Steering Wheel Module - High Control
B D-GN 348 Steering Wheel Module - Low Control
Inflatable Restraint Steering Wheel Module C1 - Dual Stage (AL0)

GM966373Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 54560208
  • 2-Way F ABX-3 Code B (WH)
Pin Wire Color Circuit No. Function
A TN 3021 Steering Wheel Module - Stage 1 - High Control
B BN 3020 Steering Wheel Module - Stage 1 - Low Control
Inflatable Restraint Steering Wheel Module C2 - Dual Stage (AL0)

GM966368Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 54550271
  • 2-Way F ABX-3 Code G (PK)
Pin Wire Color Circuit No. Function
A WH 3023 Steering Wheel Module - Stage 2 - High Control
B PK 3022 Steering Wheel Module - Stage 2 - Low Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.