Removal Procedure

2005 Chevrolet Malibu LSSECTION Removal Procedure
    CAUTION: Refer to SIR Caution .
  1. Remove the front seat. Refer to Seat Replacement - Front Bucket .
  2. Fig 1: Disconnecting Electrical Connection From Heated Seat Control Module
    GM1333137Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connection from the heated seat control module.
  4. Fig 2: Removing Fastener From Heated Seat Control Module
    GM1333139Courtesy of GENERAL MOTORS CORP.
  5. Remove the fastener from the heated seat control module.
  6. Fig 3: Removing Heated Seat Control Module
    GM1333141Courtesy of GENERAL MOTORS CORP.
  7. Remove the heated seat control module.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.