Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2005CAVALIER L4-2.2L VIN FREPAIR AND DIAGNOSISBODY AND FRAMEINTERIOR MOULDING / TRIMCONSOLESERVICE AND REPAIRCONSOLE SHIFT BOOT REPLACEMENT
2005 Chevrolet Cavalier L4-2.2L VIN F
Console Shift Boot Replacement
2005 Chevrolet Cavalier L4-2.2L VIN FSECTION Console Shift Boot Replacement
Console Shift Boot Replacement
Removal Procedure
1. Remove the front floor console.
2. Release the front tab retainer using a small flat-bladed tool and pushing back and down on the shifter boot retainer tab.
3. Remove the console shift boot from the front floor console by releasing the remainder of the retainers and pulling from the front floor console.
Installation Procedure
1. Position the shifter boot front retainer tab to the front floor console.
2. Install the shifter boot by pressing into place until fully seated.
3. Install the front floor console.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.