SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2005AVEO LS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESMECHANICAL - HYDRAULICHYDRAULIC BRAKE SYSTEMSPECIFICATIONSBRAKE SYSTEM SPECIFICATIONS
2005 Chevrolet Aveo LS, 4D Sedan, Standard

Brake System Specifications

2005 Chevrolet Aveo LS, 4D Sedan, StandardSECTION Brake System Specifications
Brake System Specifications

Application Specification
Metric English
Brake Drums
  • Inside Diameter - New
 200 mm 7.87 in
  • Maximum Inside Diameter
 201 mm 7.91 in
  • Maximum Radial Runout - Not Installed
 0.04 mm 0.002 in
Wheel Cylinder Diameter - Rear 20.64 mm 0.81 in
Brake Rotors
  • Disc Type
 Ventilated
  • Discard Thickness
 22 mm 0.866 in
  • Maximum Assembled Lateral Runout - Installed
 0.06 mm 0.002 in
  • Maximum Lateral Runout - Not Installed
 0.03 mm 0.001 in
  • Rotor Diameter
 256 mm 10.08 in
  • Rotor Thickness - New
 24 mm 0.945 in
  • Maximum Thickness Variation
 0.10 mm 0.004 in
  • Maximum Groove Depth
 0.40 mm 0.016 in
Booster Ratio 5:1
Booster Size 241.3 mm 9.5 in
Fluid Capacity 0.5 L 0.5 qt
Master Cylinder
  • Bore Diameter
 22.22 mm 0.87 in
  • Minimum Bore Diameter
 20.64 mm 0.81 in
Caliper
  • Piston Minimum Diameter
 54 mm 2.12 in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.