Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003VENTURE BASE, VAN CARGO EXTENDEDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALGAUGESINSTRUMENT PANEL, GAGES, AND CONSOLEDIAGNOSTIC INFORMATION AND PROCEDURESDTC B0160: TEMP SENSOR CIRCUIT LOWCONDITIONS FOR CLEARING THE DTC
2003 Chevrolet Venture Base, Van Cargo Extended
Conditions for Clearing the DTC
2003 Chevrolet Venture Base, Van Cargo ExtendedSECTION Conditions for Clearing the DTC
- DTC B0160 status changes from current to history when the condition is no longer present.
- History DTC B0160 will clear after 100 consecutive fault free ignition cycles.
- The DTC can be cleared with a scan tool.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.