Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 942 (TRANSFER CASE (NVG126-NP4))REPAIR INSTRUCTIONSTRANSFER CASE CONTROL MODULE REPROGRAMMINGREMOTE PROGRAMMING FEATURE
2003 Chevrolet TrailBlazer 4.2 S, 4WD
Remote Programming Feature
2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Remote Programming Feature
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the scan tool to the vehicle.
- Power-up the scan tool and select the Service Programming feature.
- Select the appropriate vehicle.
- Press the Request Info button on the scan tool.
- Connect the scan tool to the computer station.
- Follow the menu select items for reprogramming and provide information as to what type of device you are programming and whether you are reprogramming or replacing the Electronic Control Unit (ECU).
- Select "vehicle" from the selection menu.
- Select the module you wish to Program/Reprogram.
- Select "Normal" for Programming Type.
- Select the applicable software calibrations.
- Transfer data file to the scan tool.
- Reconnect the scan tool to the vehicle.
- Turn ON the ignition, with the engine OFF.
- Select the Service Programming feature on the scan tool.
- Press the Program button on the scan tool.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.