SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 692 (PERSONALIZATION SYSTEM)DESCRIPTION AND OPERATIONDRIVER PERSONALIZATIONPROGRAMMING FEATURES WITH THE TECH 2DRIVER ID
2003 Chevrolet TrailBlazer 4.2 S, 4WD

Driver ID

2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Driver ID
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Continue with the following steps in order to enter a new driver ID:

  1. Select Driver Information Center.
  2. Select Driver #1 or Driver #2.
  3. Select Driver #1 Name or Driver #2 Name (depending on your previous choice).
  4. Spell the ID with the Tech 2 keys.
  5. Exit from the menu.

Continue with the following steps in order to turn the driver ID on or off:

  1. Select Set Options.
  2. Select Driver #1 ID Displayed or Driver #2 ID Displayed.
  3. Highlight Driver #1 ID Display or Driver #2 ID Display (depending on your previous choice) and press the ENTER button to turn the selection ON or OFF. An asterisk appears when the feature is turned ON.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.