SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1848 (BUMPER SYSTEM & FASCIA)REPAIR INSTRUCTIONSFRONT BUMPER FASCIA REPLACEMENT (BASE)
2003 Chevrolet TrailBlazer 4.2 S, 4WD

Front Bumper Fascia Replacement (Base)

2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Front Bumper Fascia Replacement (Base)
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Bumper Fascia Replacement
GM1868396Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the radiator opening upper cover. Refer to Radiator Opening Upper Cover Replacement .
  2. Remove the front wheelhouse liner to fascia screw only. Refer to Front Wheelhouse Liner Replacement .
  3. Remove the front bumper fascia air deflector. Refer to Front Bumper Fascia Air Deflector Replacement .
1 Front Bumper Fascia Bolt (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tip:  Reach underneath the wheelhouse to access the bolts.

Tighten:  10 N.m (89 lb in)
2 Front Bumper Fascia Retainer (Qty: 2)
3 Front Bumper Fascia
Tip:  Pull forward to remove the front bumper fascia.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.