Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1822 (REAR DRIVE AXLE)SPECIFICATIONSREAR AXLE SPECIFICATIONS
2003 Chevrolet TrailBlazer 4.2 S, 4WD
Rear Axle Specifications
2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Rear Axle Specifications
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Rear Axle Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Assembly Rolling Torque - without Clutch Lubed Bearings | 1.9-3.5 N.m | 17-31 lb in |
| Gear Ratio L61 2.2L | 2.53 | 2.53 |
| Gear Ratio L66 3.5L | 3.39 | 3.39 |
| Pinion Shaft Preload | 1.69 N.m | 15 lb in |
| Pinion to Ring Gear Backlash | 0.125-0.225 mm | 0.005-0.009 in |
| Rear Differential Fill Quantity | 750 ml | 25.4 oz |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.