Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1774 (COMPONENT LOCATIONS AND CONNECTOR END VIEWS)SPLICE PACK CONNECTOR END VIEWSSPLICE PACK SP201 (G201)
2003 Chevrolet TrailBlazer 4.2 S, 4WD
Splice Pack SP201 (G201)
2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Splice Pack SP201 (G201)
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Splice Pack SP201 (G201) Connector Parts Information
Connector Part Information
|
Splice Pack SP201 (G201) Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| A | BK/WH | 151 | Ground |
| BK/WH | 151 | Ground (ASF w/o HEG) | |
| B-D | BK/WH | 151 | Ground |
| E | BK/WH | 151 | Ground |
| BK/WH | 151 | Ground (HP7) | |
| F-H | BK/WH | 151 | Ground |
| G | BN/WH | 151 | Ground |
| BN/WH | 151 | Ground (HP7) | |
| H | BK/WH | 151 | Ground |
| J | BK/WH | 151 | Ground |
| BK/WH | 151 | Ground (ASF w/o HEG) | |
| K | BK/WH | 151 | Ground |
| L | BK/WH | 151 | Ground |
| BK/WH | 151 | Ground (ASF w/o HEG) | |
| M | BK/WH | 151 | Ground (HP7) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.