Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1604 (CELLULAR COMMUNICATION SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2003 Chevrolet TrailBlazer 4.2 S, 4WD
Scan Tool Data List
2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Scan Tool Data List
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON with engine OFF | |||
| 8-Digit GM Part Number | Module 2 | 8 Digits | 93807890 |
| Component Serial Number 13-16 | Module 1 | 4 Digits | 0007 |
| Electronic Serial Number | Module 2 | 11 Digits | 16832516749 |
| Julian Date of Build | Module 1 | 3 Digits | 067 |
| Module I.D. | Module 2 | Alpha-numeric | Generation 3 |
| Software I.D. | Module 1 | 3 Digits | 146 |
| VCI Module Station I.D. | Module 2 | 10 Digits | 0002086783 |
| Year Module Built | Module 1 | 4 Digits | 2001 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.