Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Using the Maintenance Schedule
We at General Motors want to help you keep your vehicle in good working condition. But we do not know exactly how you will drive it. You may drive very short distances only a few times a week. Or you may drive long distances all the time in very hot, dusty weather. You may use your vehicle in making deliveries. Or you may drive it to work, to do errands or in many other ways.
Because of all the different ways people use their vehicles, maintenance needs vary. You may need more frequent checks and replacements. So please read the following and note how you drive. If you have any questions on how to keep your vehicle in good condition, see your GM Goodwrench dealer.
This schedule is for vehicles that:
- Carry passengers and cargo within recommended limits. You will find these limits on your vehicle's Certification/Tire label. Refer to Label - Vehicle Certification (w/RPO Z49) .
- Are driven off-road in the recommended manner.
- Use the recommended fuel.
The services in Scheduled Maintenance should be performed when indicated. Refer to Additional Required Services and Maintenance Footnotes for further information.
When you go to your GM Goodwrench dealer for your service needs, you'll know that GM-trained and supported service technicians will perform the work using genuine GM parts.
Owner Checks and Services tells you what should be checked, when to check it and what you can easily do to help keep your vehicle in good condition.
The proper replacement parts, fluids and lubricants to use are listed in Fluid and Lubricant Recommendations and Maintenance Items . When your vehicle is serviced, make sure these are used. All parts should be replaced and all necessary repairs done before you or anyone else drives the vehicle. We recommend the use of genuine GM parts.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.