SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1375 (HEATING, VENTILATION AND AIR CONDITIONING)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2003 Chevrolet TrailBlazer 4.2 S, 4WD

Fastener Tightening Specifications

2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Blower Motor Mounting Bolts 10 N.m 89 lb in
Compressor and Condenser Hose Assembly Bolt 25 N.m 18 lb ft
Compressor Mounting Bolts 25 N.m 18 lb ft
Condenser Inlet Bolt 5.4 N.m 48 lb in
Condenser Mounting Bolts 13 N.m 10 lb ft
Condenser Outlet Bolt 5.4 N.m 48 lb in
Evaporator Case Screws 10 N.m 89 lb in
HVAC Module Assembly Mounting Nuts 10 N.m 89 lb in
Pressure Switch 10 N.m 89 lb in
Receiver Inlet Tube Bolt 5.4 N.m 48 lb in
Receiver Mounting Bolt 10 N.m 89 lb in
Receiver Outlet Tube Bolt 5.4 N.m 48 lb in
TXV Bolts 5.4 N.m 48 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.