Removal Procedure

2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Door Check Link And Bolt
    GM242352Courtesy of GENERAL MOTORS CORP.
  1. Open the door.
  2. Remove the bolt (3) that retains the front door check link (2) to the door jamb.
  3. Fig 2: Door Weatherstrip And Plastic Retainers
    GM627018Courtesy of GENERAL MOTORS CORP.
  4. Remove the following components from the door (3):
    • The front door weatherstrip (2)
    • The plastic retainers (1)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.