SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1330 (SEAT SYSTEM)REPAIR INSTRUCTIONSSEAT CUSHION FRAME REPLACEMENT - FRONT (DRIVER SIDE)INSTALLATION PROCEDURE
2003 Chevrolet TrailBlazer 4.2 S, 4WD

Installation Procedure

2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seat Cushion Components
    GM862637Courtesy of GENERAL MOTORS CORP.
  1. Install the seat track handle (10).
  2. Install the lower seat cushion shields (5), and secure with the 2 screws (6).
  3. Install the adjuster inside covers (3) and secure with the 2 screws (4).
  4. Install the seat cushion (2) and cover (1). Refer to Seat Cushion Cover Replacement - Front .
  5. Install the drivers front seat back assembly. Refer to Seat Back Replacement - Front (Driver Side)  or Seat Back Replacement - Front (Passenger Side) .
  6. Install the seat belt buckle. Refer to Seat Belt Buckle Replacement - Left Front in Seat Belts.
  7. Install the drivers front seat assembly. Refer to Seat Replacement - Front Bucket .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.