Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1327 (NAVIGATION SYSTEMS)DIAGNOSTIC INFORMATION AND PROCEDURESNAVIGATION DIAGNOSTIC SELF-TEST FEATURESACCESSING THE NAVIGATION DIAGNOSTIC SELF-TEST FEATURES
2003 Chevrolet TrailBlazer 4.2 S, 4WD
Accessing the Navigation Diagnostic Self-Test Features
2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Accessing the Navigation Diagnostic Self-Test Features
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
To enter the navigation self-diagnostic mode, perform the following procedure:
- Turn the ignition to ACC, with the engine OFF.
- Turn the radio ON and insert the map disc.
- Press and hold the "TA" button on the navigation radio while turning the exterior lights ON and OFF 3 times.
- The navigation System Check Mode screen is displayed. Select "Menu" in upper right corner of the screen.
- The Diagnosis Menu is displayed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.