Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SCV (Speed-Compensated Volume) Control
The SCV (Speed-Compensated Volume) ring is located behind the PWR-VOL control knob. Rotating the ring up or down will automatically cause the volume to raise and lower as the speed of the vehicle increases and decreases. The top position has a higher maximum volume. The top position gets louder faster than the lower positions. When the system is ON the SCV will display. Rotating the ring all the way down will turn the SCV system OFF. Subtle changes in volume should not be noticeable to the driver when the system is working properly.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.