SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1129 (WHEEL ALIGNMENT SPECIFICATIONS & ADJUSTMENT PROCEDURES)SPECIFICATIONSWHEEL ALIGNMENT SPECIFICATIONS
2003 Chevrolet TrailBlazer 4.2 S, 4WD

Wheel Alignment Specifications

2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Wheel Alignment Specifications
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Wheel Alignment Specifications

Suspension Camber Camber Cross Caster Caster Cross Tolerance Total Toe Steering Wheel Angle Thrust Angle
Front Wheel Drive
Front -0.65° +/- 0.50° +/- 0.75° 2.40° +/- 0.75° +/- 0.75° 0.00° +/- 0.20° 0.00° +/- 3.50° -
Rear 0.00° +/- 0.50° +/- 0.50° - - +0.00° +/- 0.30° - 0.00° +/- 0.30°
All Wheel Drive and I.R.S.
Front -0.65° +/- 0.75° +/- 0.75° 2.40° +/- 0.75° +/- 0.75° 0.00° +/- 0.20° 0.00° +/- 3.50° -
Rear -0.30° +/- 0.60° +/-0.60° - - 0.00° +/- 0.20° - 0.00° +/- 0.20°
Caster (Nominal - No means of adjustment provided.)
Camber Cross Tolerance (Nominal - No means of adjustment provided.)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.