Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1100 (BODY REAR END)COMPONENT LOCATORBODY REAR END CONNECTOR END VIEWS
2003 Chevrolet TrailBlazer 4.2 S, 4WD
Body Rear End Connector End Views
2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Body Rear End Connector End Views
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Endgate Latch Connector End View - Left - C1 (Pontiac)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BLK | 450 | Ground |
| B | YEL | 656 | Endgate Open Switch Signal |
| C | PNK/BLK | 1303 | Endgate Ajar Switch Signal |
| D | - | - | Not Used |
Endgate Latch Connector End View - Right - C1 (Pontiac)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | - | - | Not Used |
| B | PNK/BLK | 1303 | Endgate Ajar Switch Signal |
| C | YEL | 656 | Endgate Open Switch Signal |
| D | BLK | 450 | Ground |
Endgate Latch Connector End View - Left - C2 (Pontiac)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | ORN | 9294 | Liftgate Motor Unlock |
| B | RED | 9295 | Liftgate Motor Lock |
Endgate Latch Connector End View - Right - C2 (Pontiac)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | ORN | 9294 | Liftgate Motor Unlock |
| B | RED | 9295 | Liftgate Motor Lock |
I/P Switch Assembly C1 Connector End View (Pontiac)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | GRY | 8 | Instrument Panel Lamp Supply Voltage |
| B | BLK | 150 | Ground |
| C | WHT/BLK | 1221 | Liftgate Release Switch Signal |
| D | BRN/WHT | 1571 | Traction Control Switch Signal |
| E-H | - | - | Not Used |
I/P Switch Assembly Connector End View C1 (Buick)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | GRY | 8 | Instrument Panel Lamp Supply Voltage |
| B | BLK | 1450 | Ground |
| C-D | - | - | Not Used |
| E | WHT/BLK | 1221 | Liftgate Release Switch Signal |
| F | GRY | 391 | Rear Window Wiper Switch Signal |
| G | YEL | 343 | Accessory Voltage |
| H | DK GRN | 392 | Rear Window Washer Pump Control |
I/P Switch Assembly C2 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | GRY | 8 | Instrument Panel Lamp Supply Voltage 1 |
| B | BLK | 150 | Ground |
| C | LT GRN | 911 | Rear Defog Relay Coil Supply Voltage |
| D | LT BLU | 1462 | Driver Heated Seat Switch Signal |
| E | LT BLU/BLK | 1505 | Front Passenger Heated Seat Switch Signal |
| F-H | - | - | Not Used |
I/P Switch Assembly C3 Connector End View (Buick)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | GRY | 8 | Instrument Panel Lamp Supply Voltage |
| B | BLK | 150 | Ground |
| C-F | - | - | Not Used |
| G | LT GRN | 9380 | Rear Parking Assist Disable Switch Signal |
| H | BRN | 241 | Ignition 3 Voltage |
I/P Switch Assembly C4 - JM4 Connector End View (Buick)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | GRY | 8 | Instrument Panel Lamp Supply Voltage |
| B | BLK | 150 | Ground |
| C | BRN/WHT | 1571 | Traction Control Switch Signal (NW9) |
| D-H | - | - | Not Used |
Liftgate Latch - C1 Connector End View (Buick)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | - | - | Not Used |
| B | PNK/BLK | 1303 | Endgate Ajar Switch Signal |
| C | YEL | 656 | Endgate Open Switch Signal |
| D | BLK | 1150 | Ground |
Liftgate Latch - C2 Connector End View (Buick)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | WHT | 1304 | Liftgate Motor Lock Control |
| B | PPL | 1305 | Liftgate Lock Motor Unlock Control |
Lift Window Latch Connector End View - Left (Pontiac)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BLK | 450 | Ground |
| B | PPL | 2279 | Lift Glass Ajar Switch Signal |
| C | - | - | Not Used |
Lift Window Lock Actuator Connector End View - Left (Pontiac)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | LT BLU | 383 | Lift Glass Release Control |
| B | BLK | 450 | Ground |
Lift Window Latch Connector End View - Right (Pontiac)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BLK | 450 | Ground |
| B | RED/BLK | 744 | Lift Glass Ajar Switch Signal |
| C | - | - | Not Used |
Lift Window Lock Actuator Connector End View - Right (Pontiac)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | LT BLU | 383 | Lift Glass Release Control |
| B | BLK | 450 | Ground |
Lock Cylinder Switch Connector End View - Endgate (Pontiac)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PPL | 9124 | Liftgate Release Switch Signal |
| B | BLK | 450 | Ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.