Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Scan Tool Data Definitions
- 8 Digit GM Part Number
-
The scan tool displays the 8 digit BCM part number for service identification.
- Electronics Battery Fd
-
The scan tool displays 0.0-25.5 volts. Electronics Battery Fd represents the system voltage measured by the BCM at its battery feed input.
- Ignition 0 (Data)
-
The scan tool displays 0.0-25.5 volts. The Ignition 0 voltage represents the system voltage measured at the BCM Ignition 0 feed input.
- Ignition 0 (Inputs)
-
The scan tool displays Active/Inactive. The scan tool displays Active when the ignition switch is in ACCY or RUN positions.
- Ignition 1
-
The scan tool displays Active/Inactive. The scan tool displays Active when the ignition switch is in RUN or START positions.
- Ignition Accessory
-
The scan tool displays Active/Inactive. The scan tool displays Active when the ignition switch is in ACCY or RUN positions.
- Key In Ignition
-
The scan tool displays Active/Inactive. The scan tool displays Active when the ignition key is inserted into the ignition switch.
- Park/Neutral Switch
-
The scan tool displays Active/Inactive. The scan tool displays Active when the shift lever is in the Park or Neutral positions.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.