Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003TRAILBLAZER 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1051 (ENGINE EXHAUST SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2003 Chevrolet TrailBlazer 4.2 S, 4WD
Fastener Tightening Specifications
2003 Chevrolet TrailBlazer 4.2 S, 4WDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Exhaust Gas Recirculation (EGR) Cooler Tube Nut (6.6L) | 30 N.m | 20 lb ft |
| Exhaust Hanger Bracket Bolt | 12 N.m | 106 lb in |
| Exhaust Heat Shield Bolt (Body Panel) | 9 N.m | 80 lb in |
| Exhaust Heat Shield Nut (Body Panel) | 9 N.m | 80 lb in |
| Exhaust Manifold Bolts (4.8L, 5.3L, and 6.0L) | ||
|
15 N.m | 11 lb ft |
|
25 N.m | 18 lb ft |
| Exhaust Manifold Bolt/Nut (6.6L) | 34 N.m | 25 lb ft |
| Exhaust Manifold Bolt/Stud (4.3L) | 30 N.m | 22 lb ft |
| Exhaust Manifold Center Bolt (8.1L) | 35 N.m | 26 lb ft |
| Exhaust Manifold Heat Shield Bolt (4.3L, 4.8L, 5.3L, and 6.0L) | 9 N.m | 80 lb in |
| Exhaust Manifold Heat Shield Bolt (6.6L) | 8 N.m | 71 lb in |
| Exhaust Manifold Heat Shield Bolt/Nut (8.1L) | 25 N.m | 18 lb ft |
| Exhaust Manifold Nut (8.1L) | 16 N.m | 12 lb ft |
| Exhaust Manifold Pipe Nut | 50 N.m | 37 lb ft |
| Exhaust Muffler Hanger Nut | 50 N.m | 39 lb ft |
| Exhaust Muffler Nut | 40 N.m | 30 lb ft |
| Exhaust Outlet Pipe Clamp (6.6L) | 15 N.m | 11 lb ft |
| Exhaust Outlet to Right Exhaust Pipe Bracket Bolt (6.6L) | 34 N.m | 25 lb ft |
| Exhaust Pipe Clamp | 44 N.m | 33 lb ft |
| Exhaust Pipe Hanger Bracket Bolt | 12 N.m | 106 lb in |
| Exhaust Pipe Hanger Bracket Bolt (4L60-E) | 17 N.m | 13 lb if |
| Exhaust Pipe Heat Shield Bolt (6.6L) | 8 N.m | 71 lb in |
| Exhaust Pipe to Manifold Bolt (6.6L) | 53 N.m | 39 lb ft |
| Exhaust Pipe to Turbocharger Bolt (6.6L) | 53 N.m | 39 lb ft |
| Hood Hinge Bolt | 25 N.m | 18 lb ft |
| Intake Manifold Cover Clamp (6.6L) | 6 N.m | 53 lb in |
| Oil Level Indicator Tube Bracket Bolt (6.6L) | 21 N.m | 15 lb ft |
| Outlet Duct Clamp | 6 N.m | 53 lb in |
| Oxygen Sensor | 42 N.m | 31 lb ft |
| Rear Shock Absorber Lower Bolt | 95 N.m | 70 lb ft |
| Spark Plug (4.3L) | 15 N.m | 11 lb ft |
| Spark Plug Wire Retainer Bolt (4.3L) | 12 N.m | 106 lb in |
| Transmission Bolt | 100 N.m | 74 lb ft |
| Transmission Fluid Fill Tube Nut (6.6L) | 18 N.m | 13 lb ft |
| Transmission Mount to Support Nut | 40 N.m | 30 lb ft |
| Transmission Support Crossmember Bolt | 95 N.m | 70 lb ft |
| Turbocharger Exhaust Pipe Bolt/Nut (6.6L) | 53 N.m | 39 lb ft |
| Turbocharger Exhaust Pipe Heat Shield Bolt (6.6L) | 8 N.m | 71 lb in |
| Turbocharger Heat Shield Bolt (6.6L) | 9 N.m | 80 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.