Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003S10 PICKUP 2D PICKUP, 2.2 H, AUTOMATICREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXINSTRUMENT PANEL DTCS
2003 Chevrolet S10 Pickup 2D Pickup, 2.2 H, Automatic
Instrument Panel DTCS
2003 Chevrolet S10 Pickup 2D Pickup, 2.2 H, AutomaticSECTION Instrument Panel DTCS
INSTRUMENT PANEL DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description |
|---|---|
| DTC B1367 | Ignition 0 Voltage Circuit Is Less Than 75 Percent Of Battery Voltage |
| DTC B2961 | Ignition 1 Input Is Active |
| DTC P0461 | No Change In Fuel Level Over Distance |
| DTC P0462 | Fuel Level Signal Low |
| DTC P0463 | Fuel Level Signal High |
| DTC P0608 | Commanded State Of The Driver And The Actual State Of The Control Circuit Do Not Match |
| DTC P0654 | Commanded State Of The Driver And The Actual State Of The Control Circuit Do Not Match |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.