Procedure To Learn A Smooth 1-2 Upshift & 3-2 Kickdown

2003 Chevrolet S10 Pickup 2D Pickup, 2.2 H, AutomaticSECTION Procedure To Learn A Smooth 1-2 Upshift & 3-2 Kickdown
WARNING: This page does not describe the selected car, but rather 120 other vehicles, including the 2002 Saturn Vue, 2002 Saturn SL2, 2002 Saturn SL1, 2002 Saturn SL, and 2002 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Transmission fluid temperature must be above 110Β°F (43Β°C).

Use the following steps to have the TCM learn the 2C shift volume.

  1. With a vehicle speed below 30 MPH and the transmission in 3rd gear, perform multiple 3-2 kickdowns.
  2. Repeat step Β 1 until the 3-2 kickdowns become smooth and the 2C CVI becomes stable.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.