Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2003CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 6.0 UREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEMREPAIR INSTRUCTIONSSEAT REPLACEMENT - REAR BENCHREMOVAL PROCEDURE

2003 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 U

Removal Procedure

2003 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 USECTION Removal Procedure

Rotate the locking pin (3) at the rear of the seat riser out of the retainer.
Pull the locking pin (3) out from the rear of the seat riser.

Fig 1: Removing Locking Pin From Rear Of Seat Riser
Courtesy of GENERAL MOTORS CORP.
Stow the locking pin in the hole provided at the rear of the seat riser (2).

Fig 2: Stowing Locking Pin In Hole
Courtesy of GENERAL MOTORS CORP.
Lift the seat up and out of the floor rails.

Fig 3: Lifting Seat Up From Floor Rails
Courtesy of GENERAL MOTORS CORP.
Remove the seat from the vehicle.

Fig 4: Removing Rear Bench Seat
Courtesy of GENERAL MOTORS CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.