SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 6.0 UREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEMREPAIR INSTRUCTIONSSEAT CUSHION FRAME REPLACEMENTREMOVAL PROCEDURE
2003 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 U

Removal Procedure

2003 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 USECTION Removal Procedure
  1. Remove the front seat from the vehicle. Refer to Seat Replacement .
  2. Remove the seat cushion cover and pad. Refer to Seat Cushion Cover and Pad Replacement - Front .
  3. Remove the bolts (7) retaining the seat back hinge / recliner mechanisms (6) to the seat cushion frame. Refer to Seat Back Hinge/Recliner Mechanism Replace - Front .
    Fig 1: Removing Seat Back Hinge/Recliner Mechanisms To Seat Cushion Frame Bolts
    G02423268Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts (4) retaining the seat cushion frame to the adjuster.
    Fig 2: Removing Seat Cushion Frame To Adjuster Bolts
    G02423269Courtesy of GENERAL MOTORS CORP.
  5. Remove the power seat switch bracket (2), if equipped.
    Fig 3: Removing Power Seat Switch Bracket
    G02423270Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.