Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 6.0 UREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIMREPAIR INSTRUCTIONSGARNISH MOLDING REPLACEMENT - RIGHT SIDE FRONTREMOVAL PROCEDURE
2003 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 U
Removal Procedure
2003 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 USECTION Removal Procedure
- Remove the passenger side body side trim panel. Refer to Trim Panel Replacement - Right Body Side .
- Remove the passenger side body side rear upper garnish molding. Refer to Garnish Molding Replacement - Body Side Rear Upper .
- Grasp and gently pull the passenger side front corner garnish molding down in order to disengage the retaining clips.
- Slip the seat belt through the slot in the passenger side front corner garnish molding.
- Remove the passenger side front corner garnish molding from the vehicle.
- Inspect the passenger side front corner garnish n molding for broken or missing retaining clips. ) Replace the clips as needed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.