Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
2002 Chevrolet Venture PlusSECTION Removal Procedure
- Remove the second row 60/40 split bench seat. Refer to Seat Replacement - Rear .
- Remove the head restraint. Refer to Head Restraint Replacement - Rear Seat .
- Remove the rear seat back finish panel. Refer to Seat Back Filler Panel Replacement - Rear .
- Separate the seat back cover retainer from the bottom edge of the rear seat back cover (2).
- Remove the rear seat back recliner cover. Refer to Seat Back Recliner Cover Replacement - Rear .
- Reposition the rear seat back cover and foam away from the recliner to expose the recliner bolts.
- Remove the recliner bolts.
- Separate the rear seat back from the rear seat cushion.
- Remove the rear seat back cover retainer rings.
- Separate the rear seat back cover away from the foam pad while separating the hook and loop retainers (1).
- Remove the rear seat back cover from the foam pad.
- Remove the rear seat back pad from the seat back frame.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.