Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Remote Activation Verification
The following are the modes of operation for the remote activation verification for the keyless entry system:
- Mode 1:
The remote activation verification feature is disabled.
- Mode 2:
The headlamps flash when the LOCK button or the UNLOCK button on the keyless entry transmitter is pressed.
- Mode 3:
The headlamps flash and the horn chirps when the LOCK button on the keyless entry transmitter is pressed. The headlamps flash when the UNLOCK button on the keyless entry transmitter is pressed.
- Mode 4:
The headlamps flash when the LOCK button or the UNLOCK button on the keyless entry transmitter is pressed. The headlamps flash and the horn chirps when the LOCK button is pressed a second time (within 5 seconds of the first press).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.