Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002TAHOE 4.8 V, 4WDREPAIR AND DIAGNOSISENGINE MECHANICALSTARTERSTARTING SYSTEMTORQUE SPECIFICATIONS
2002 Chevrolet Tahoe 4.8 V, 4WD
Torque Specifications
2002 Chevrolet Tahoe 4.8 V, 4WDSECTION Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Battery Terminal Bolt (4.3L) | 13 (17) | |
| Engine Shield Bolts | 15 (20) | |
| Front Axle Mounting Bracket Nut | 70 (95) | |
| Oil Pan Skid Plate Bolts | 15 (20) | |
| Starter Bolts | ||
| 4.3L | 32 (43) | |
| 4.8L, 5.3L, 6.0L, & 8.1L | 37 (50) | |
| 6.6L | 58 (78) | |
| INCH Lbs. (N.m) | ||
| M-Terminal Stud Nut (6.6L) | 71 (8) | |
| Solenoid Bolts (6.6L) | 89 (10) | |
| Starter Battery Positive Cable Nut | 80 (9) | |
| Starter Heat Shield | ||
| Bolts | 35 (3) | |
| Nut | 44 (5) | |
| Starter Lead Nut | ||
| 4.3L | 80 (9) | |
| 4.8L, 5.3L, 6.0L, & 8.1L | 30 (3.4) | |
| Starter Solenoid Nut | 30 (3.4) | |
| Transmission Cover Bolt (4.8L, 5.3L & 6.0L) | 80 (9) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.