Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2002SILVERADO 1500 HD, RWDREPAIR AND DIAGNOSISBODY & FRAMESEATSPOWER SEAT SYSTEMREPAIR INSTRUCTIONSMEMORY SEAT CONTROL MODULE REPLACEMENTREMOVAL PROCEDURE

2002 Chevrolet Silverado 1500 HD, RWD

Removal Procedure

2002 Chevrolet Silverado 1500 HD, RWDSECTION Removal Procedure

Remove the seat trim panel. Refer to Trim Panel Replacement - Front Seat .
Remove the seat cushion. Refer to Seat Cushion Frame Replacement - Front .
Disconnect the harness connectors (2).
Remove the memory module retaining screws (1).

Fig 1: Locating Memory Module Assembly
Courtesy of GENERAL MOTORS CORP.
Slide the module out.
Remove the module from the vehicle.

Fig 2: Removing Memory Module Assembly
Courtesy of GENERAL MOTORS CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.