Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002S10 PICKUP 2D PICKUP, 2.2 5, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 2 (SHIFT INTERLOCK SYSTEMS)REMOVAL & INSTALLATIONKNEE BOLSTERINSTALLATION
2002 Chevrolet S10 Pickup 2D Pickup, 2.2 5, Standard
Knee Bolster: Installation
2002 Chevrolet S10 Pickup 2D Pickup, 2.2 5, StandardSECTION Installation
WARNING: This page is about a different variant/trim than selected.
- Install the knee bolster trim panel to the vehicle. Install the screws that retain the knee bolster trim panel to the instrument panel. Tighten the Torx® screws to 80 INCH lbs. (9 N.m). Tighten the hex head screws to 17 INCH lbs. (1.9 N.m).
- Install the screw that retains the courtesy light to the knee bolster. See Figure. Install the parking brake release cable to the parking brake lever.
- Install the lower instrument panel sound insulator. See LOWER INSULATOR PANEL . Install the left-side instrument panel sound insulator. See LEFT INSULATOR PANEL .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.