SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002S10 PICKUP 2D PICKUP, 2.2 5, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEWINDOWSSTATIONARY WINDOW SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESDIAGNOSTIC STARTING POINT - STATIONARY WINDOWS
2002 Chevrolet S10 Pickup 2D Pickup, 2.2 5, Standard

Diagnostic Starting Point - Stationary Windows

2002 Chevrolet S10 Pickup 2D Pickup, 2.2 5, StandardSECTION Diagnostic Starting Point - Stationary Windows

For the inside rearview mirror with the automatic day-night feature or the rear window defogger (w/o C68), begin the diagnosis by reviewing the system Description and Operation. Reviewing the Description and Operation information will help you determine the correct symptom diagnostic procedure when a malfunction exists. Reviewing the Description and Operation information will also help you determine if the condition described by the customer is normal operation. Refer to Symptoms - Stationary Windows  in order to identify the correct procedure for diagnosing the system and where the procedure is located.

For the rear window defogger, begin the diagnosis with the Diagnostic System Check - Defogger . The Diagnostic System Check will provide the following information:

  • The identification of the control module(s) which command the system
  • The ability of the control module(s) to communicate through the serial data circuit
  • The identification of any stored diagnostic trouble codes (DTCs) and their status

The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.