Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002S10 PICKUP 2D PICKUP, 2.2 5, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESEATSPOWER SEAT SYSTEMREPAIR INSTRUCTIONSSEAT REPLACEMENT - BUCKETREMOVAL PROCEDURE
2002 Chevrolet S10 Pickup 2D Pickup, 2.2 5, Standard
Removal Procedure
2002 Chevrolet S10 Pickup 2D Pickup, 2.2 5, StandardSECTION Removal Procedure
- Remove the seat adjuster trim covers. Refer to SEAT ADJUSTER TRACK COVER REPLACEMENT - FRONT (POWER) or SEAT ADJUSTER TRACK COVER REPLACEMENT - FRONT (MANUAL) .
- Remove 3 seat mounting nuts.
- Remove the seat mounting bolt.
- Disconnect the electrical connectors from seat if necessary.
- Remove the seat from the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.