Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002CAVALIER BASE, 4D SEDAN, 2.4 TREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 51 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)REMOVAL & INSTALLATIONFRONT-END DISCRIMINATING SENSORINSTALLATION
2002 Chevrolet Cavalier Base, 4D Sedan, 2.4 T
Front-End Discriminating Sensor: Installation
2002 Chevrolet Cavalier Base, 4D Sedan, 2.4 TSECTION Installation
WARNING: This page is about a different car, the 2001 Pontiac Sunfire and 2001 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Align sensor to vehicle, ensuring arrow on sensor body is pointing toward front of vehicle. Install bolts and tighten to specification. See TORQUE SPECIFICATIONS . Reconnect sensor connector and install CPA clip.
- Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Check system for proper operation. See SYSTEM OPERATION CHECK .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.