Injector Resistance

2002 Chevrolet Cavalier Base, 4D Sedan, 2.4 TSECTION Injector Resistance
INJECTOR RESISTANCE SPECIFICATIONS

Application (1) Ohms
1.8L (2) 13.4-14.4
1.9L (3) 11.8-12.6
2.2L
"J" Body
Cavalier & Sunfire 11.0-14.0
Saturn ("L" Series) (3) 12.0-13.0
"N" Body 11.0-14.0
3.0L 14.0-23.0
3.4L
Except Impala & Monte Carlo 11.0-14.0
Impala & Monte Carlo 11.4-12.6
All Others 11.0-14.0
(1) Unless otherwise specified, injector resistance specification is at 50-95°F (10-35°C).
(2) Injector voltage is also measured. Voltage reading should be 6.7-7.7 volts.
(3) Injector resistance specification is at 74°F (23.3°C).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.