Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2002CAVALIER BASE, 4D SEDAN, 2.2 4, LN2, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESPECIFICATIONSENGINE CONTROL SYSTEM - SERVICE & ADJUSTMENT SPECIFICATIONSCAPACITIESAUTOMATIC TRANSAXLE/TRANSMISSION FLUID CAPACITY

2002 Chevrolet Cavalier Base, 4D Sedan, 2.2 4, LN2, Standard

Automatic Transaxle/Transmission Fluid Capacity

2002 Chevrolet Cavalier Base, 4D Sedan, 2.2 4, LN2, StandardSECTION Automatic Transaxle/Transmission Fluid Capacity

FLUID CAPACITY (AUTOMATIC TRANSAXLE/TRANSMISSION) ⁽¹⁾⁽²⁾

Application

⁽³⁾ Quantity Qts. (L)

"C" Body

6.0 (5.7)

"E" & "K" Bodies

11.0 (10.4)

"F" & "Y" Bodies

5.0 (4.7)

"G" Body

4T65-E

7.4 (7.0)

4T80-E

11.0 (10.4)

"H" Body

7.4 (7.0)

"J" Body

Cavalier & Sunfire

3-Speed

4.0 (3.8)

4-Speed

6.9 (6.5)

Saturn ("L" Series)

6.9 (6.5)

"M" Body

3-Speed

2.6 (2.5)

4-Speed

1.6 (1.5)

"N" Body

6.9 (6.5)

"S" Body

3-Speed

2.6 (2.5)

4-Speed

3.3 (3.1)

"W" Body

7.4 (7.0)

"Z" Body

⁽⁴⁾ 4.2 (4.0)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Drain and refill capacity only. Does not include torque converter.

⁽³⁾	Unless otherwise specified, use Dexron-III transmission fluid.

⁽⁴⁾	Use Saturn transaxle fluid or Dexron-III. If Dexron-III is used, service transmission fluid and filter every 30,000 miles rather than 100,000 miles.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.