Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002CAVALIER BASE, 4D SEDAN, 2.2 4, LN2, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALCOOLING SYSTEM (MECHANICAL)ENGINE COOLING SYSTEMREPAIR INSTRUCTIONSRADIATOR HOSE REPLACEMENT - INLET (2.4L - LD9)REMOVAL PROCEDURE
2002 Chevrolet Cavalier Base, 4D Sedan, 2.2 4, LN2, Standard
Removal Procedure
2002 Chevrolet Cavalier Base, 4D Sedan, 2.2 4, LN2, StandardSECTION Removal Procedure
- Remove battery.
- Drain the cooling system. Refer to DRAINING & FILLING COOLING SYSTEM - 2.2L (L61) .
- Use the J 38185 in order to Reposition the radiator inlet hose clamp from the water outlet.
- Remove the radiator inlet hose from the water outlet.
- Use the J 38185 in order to Reposition the radiator inlet hose clamp from the radiator.
- Remove the radiator inlet hose from the radiator.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.