Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSCHEVROLET2002AVALANCHE 2500, RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1337 (CELLULAR COMMUNICATION SYSTEM)
2002 Chevrolet Avalanche 2500, RWD
Section 1337 (Cellular Communication System)
2002 Chevrolet Avalanche 2500, RWDSECTION Section 1337 (Cellular Communication System)
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Schematic and Routing Diagrams
- Component Locator
- Diagnostic Information and Procedures
- Diagnostic Starting Point - Cellular Communication
- Diagnostic System Check - Cellular Communication
- Scan Tool Data List
- Scan Tool Data Definitions
- Diagnostic Trouble Code (DTC) List
- DTC B2455 (Gen. 4): Open In Drain Wire Circuit Or A Short To Voltage In Cellular Microphone Signal Circuit
- DTC B2455 (Gen. 5): Open In Drain Wire Circuit Or A Short To Voltage In Cellular Microphone Signal Circuit
- DTC B2470: VCIM Does Not Detect The Presence Of A Cellular Antenna
- DTC B2476 (Gen. 4): Keypad Supply Voltage Circuit High
- DTC B2482: A Button Is Pressed Or Stuck For More Than 15 Seconds
- DTC B2483 or B2484: VCIM Does Not Detect A Navigation Signal
- DTC U1500: VCIM Detects An Internal Communication Malfunction
- OnStar Symptom Diagnosis
- Symptoms - Cellular Communication
- OnStar One or More Buttons Inoperative
- OnStar Call Center Remote Function Requests Inoperative
- Unable to Contact OnStar Call Center
- Microphone Inoperative - Caller Cannot Be Heard (Gen. 4)
- Microphone Inoperative - Caller Cannot Be Heard (Gen. 5)
- Voice Recognition Inoperative
- OnStar Button LED Inoperative
- No (or Noisy) OnStar Audio
- Global Positioning System (GPS) Data Not Current or Inaccurate
- Repair Instructions
- Description and Operation
- OnStar Description and Operation
- Notes
- Vehicle Communication Interface Module (VCIM)
- OnStar® Button Assembly
- OnStar® Microphone
- Cellular and Navigation Antennas
- OnStar Sleep Cycle
- Deactivated OnStar® Accounts
- OnStar® Reconfiguration Procedure
- OnStar® Cellular, GPS, and Diagnostic Limitations
- OnStar® Personal Calling
- Operation of the Hands Free Cellular Phone
- OnStar® Steering Wheel Controls
- OPC Features
- Voice Feedback
- OPC Security/System Lock
- Nametags
- Mobile Identification Number and Mobile Directory Number
- OnStar Description and Operation
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.