Control Module References

2002 Chevrolet Avalanche 2500, RWDSECTION Control Module References
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Control Module References

Control Module Repair Diagnostic System Check Schematic
Body Control Module (BCM) Refer to Body Control Module Replacement  Refer to Diagnostic Starting Point - Body Control System  Refer to Body Control System Schematics 
Electronic Brake/Traction Control Module (EBTCM) Refer to Electronic Brake Control Module Replacement in Antilock Brake System Refer to Diagnostic System Check - ABS in Antilock Brake System Refer to ABS Schematics in Antilock Brake System
Engine Control Module (ECM) (L61) Refer to ENGINE CONTROL MODULE Refer to DIAGNOSTIC SYSTEM CHECK -- ENGINE CONTROLS
Engine Control Module (ECM) (L81) Refer to ENGINE CONTROL MODULE Refer to DIAGNOSTIC SYSTEM CHECK -- ENGINE CONTROLS
Inflatable Restraint Sensing and Diagnostic Module (SDM) Refer to SENSING & DIAGNOSTIC MODULE (SDM) Refer to SIR DIAGNOSTIC SYSTEM CHECK
Instrument Panel Cluster (IPC) Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel Gages and Console Refer to Diagnostic System Check - Instrument Cluster in Instrument Panel Gages and Console Refer to Instrument Cluster Schematics in Instrument Panel Gages and Console
Power Steering Control Module (PSCM) Refer to Steering Column Replacement in Steering Wheel and Column Refer to Diagnostic System Check - Power Steering System in Power Steering System Refer to Power Steering System Schematics in Power Steering System
Transmission Control Module (TCM) (AF33-5) Refer to Transmission Control Module (TCM) Replacement in Automatic Transaxle AF33-5 Refer to Diagnostic System Check - Automatic Transmission in Automatic Transaxle AF33-5 Refer to Automatic Transmission Controls Schematics in Automatic Transaxle AF33-5
Transmission Control Module (TCM) (VT25-E)
Vehicle Communication Interface Module (VCIM) Refer to Communication Interface Module Replacement in Cellular Communication Refer to Diagnostic System Check - Cellular Communication in Cellular Communication Refer to OnStar® Schematics in Cellular Communication
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.