Installation Procedure

2002 Chevrolet Avalanche 2500, RWDSECTION Installation Procedure
    Fig 1: Guide Tab, Channel & Retainer
    GM728608Courtesy of GENERAL MOTORS CORP.
  1. Slide the drain channel into the guide tab (2).
  2. Push on the drain channel (1) until it locks into place by the retainer (3). Do the same for the other side.
  3. Ensure both sides are properly seated in the guide.
  4. Install the sunroof glass panel. Refer to Sunroof Glass Panel ReplacementΒ .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.