Cargo Area Water Management System Identification

2002 Chevrolet Avalanche 2500, RWDSECTION Cargo Area Water Management System Identification
Fig 1: All Weather Cargo Area Disassembled View
GM1284797Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Top Drain Grate (Right)
2 Side Rail Channel and Catch Cups (Right)
3 Rear Drain (Right)
4 Front Drain (Right)
5 Cargo Floor Mat
6 Front Drain (Left)
7 Cargo Floor
8 Rear Drain (Left)
9 Water Drainage Area (Both Sides of the Cargo Box and End Gate)
10 Side Rail Channel and Catch Cups (Left)
11 Top Drain Grate (Left)
12 Mid Gate Drain Gate
IMPORTANT: All drain valves are removable for cleaning of the valve and the drain channel. Please note the position of the drain valve to the vehicle before removal. Improper installation of a drain valve will allow improper draining of the water and possible excessive water intrusion into the cargo/cab area.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.