Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
2001 Chevrolet Suburban C1500SECTION Removal Procedure
- Remove the differential carrier assembly. Refer to Differential Carrier Assembly Replacement .
- Remove the upper differential carrier assembly bushing by performing the following steps:
- Install the J-36616-2 (1), the J-33791-1 (2), the thrust bearing (3), the J-21474-18 (4), and the forcing screw as shown.
- Remove the upper differential carrier assembly bushing by holding the forcing screw and slowly tightening the J-21474-18.
- Remove the lower differential carrier assembly bushing by performing the following steps:
- Install the J-21474-18 (1), the thrust bearing (2), the J-33791-1 (3), the J-36616-2 (4), and the forcing screw as shown.
- Remove the lower differential carrier assembly bushing by holding the forcing screw and slowly tightening the J-21474-18.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.